| Customization: | Available |
|---|---|
| Application: | Dedicated VFD |
| Output Type: | Triple |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
•Closed-loop vector control; low-frequency large-torque stable operation: 0Hz/150% steady output of the rated torque to ensure stable operation of lifting equipment in the process of starting, lifting and lowering.
| Item | Specification | |
| Power supply | Rated voltage of power supply | Three-phase 380V-20%~415V+20%, 50~60Hz±5%, voltage unbalance rate<3% |
| Output | Maximum output voltage | The maximum output voltage is the same as the input power voltage. |
| Rated output current | Continuous output of 100% rated current | |
| Overload capacity of heavy-duty type | 150% rated current: 60s; 180% rated current: 10s | |
| Overload capacity of super heavy-duty type | 150% rated current: 60s; 200% rated current: 3s | |
| Basic control functions | Driving mode | V/F control (VVF); |
| Speed sensorless vector control (SVC) | ||
| Speed sensor vector control (FVC) | ||
| Input mode | Frequency (speed) input, torque input | |
| Start and stop control mode | Keyboard, control terminal (two-line control and three-line control), communication | |
| Frequency control range | 0.00~600.00Hz | |
| Input frequency resolution | Digital input: 0.01Hz Analog input: 0.1% of maximum frequency | |
| Speed control range | 1:50 (VVF), 1:1000 (FVC) | |
| Speed control accuracy | Rated synchronous speed ± 0.2% | |
| Acceleration and deceleration time | 0.01 s to 600.00 s / 0.1 s to 6,000.0 s / 1 s to 60,000 s | |
| Voltage/frequency characteristics | Rated output voltage: 20% to 100%, adjustable; fundamental frequency: 1Hz to 600Hz, adjustable | |
| Torque boost | Fixed torque boost curve, any V/F curve optional | |
| Starting torque | 150%/1Hz (VVF), 150%/0.25Hz (SVC), 150%/0Hz (FVC) | |
| Torque control accuracy | ±5% rated torque (FVC) | |
| Self-adjustment of output voltage | When the AVR function is enabled, the output voltage remains basically the same as the input voltage changes | |
| Automatic current limit | Output current is automatically limited to avoid frequent overcurrent trips. | |
| DC braking | Braking frequency: 0.01 to maximum frequency Braking time: 0~30S | |
| Braking current: 0% to 100% of rated current | ||
| Signal input source | Communication, multi-speed, analog, high-speed pulse, etc. | |
| Input&Output Function | Reference power supply | 10V/20mA |
| Terminal control power | 24V/200mA | |
| Digital input terminal | 7-channel digital multi-functional input terminal | |
| Analog input terminal | 3 (standard AI1 to AI3) + 1 (extension card AI4) analog inputs: | |
| One (AI1) voltage source: 0 to 10V input | ||
| Two (AI2/AI3): 0 to 10V input voltage or 0 to 20mA input current optional; | ||
| Digital output terminal | 2 (standard Y1/Y2) + 1 (extension card Y3) open-collector multi-function outputs and 2 (R1: EA/EB/EC and R2:RA/RB/RC) relay multi-function outputs. | |
| Maximum output current of the collector: 50mA; relay contact capacity: 250VAC/3A or 30VDC/1A, with EA-EC and RA-RC normally open and EB-EC and RB-RC normally closed | ||
| Analog output terminal | Two (M1/M2) multi-function analog output terminals, with output of 0 to 10V or 0 to 20mA | |
| Keyboard Display | LED display | The LED digital tube displays relevant information about the inverter. |
| Parameter copying | Parameter settings of the inverter can be uploaded and downloaded for fast parameter copying. | |
| Protection | Protective Function | Short circuit, overcurrent, overvoltage, undervoltage, phase loss, overload, overheat, overspeed, load loss, external fault, etc. |
| Use conditions | Location | Indoor, at an altitude of less than 1 km, free of dust, corrosive gases and direct sunlight |
| Applicable environment | -10ºC to + 40ºC, 20% to 90% RH (no condensation) | |
| Vibration | Less than 0.5g | |
| Storage environment | -25ºC~+65ºC | |
| Installation method | Wall-mounted, floor-standing electrical control cabinet, through-wall | |
| Protection level | IP20/IP21 (450kW and above) | |
| Cooling method | Forced air cooling | |
| Specifications | W | W1/W2 | H | H1 | H2 | D | D1 | D2 | d | Appearance |
| EM630-4R0-3B | 130 | 115/120 | 228 | 220 | 219 | 153 | 108 | 75 | 5 | (b) |
| EM630-5R5-3B | 140 | 120/130 | 270 | 261 | 258 | 172 | 128 | 94 | 5 | |
| EM630-7R5-3B | ||||||||||
| EM630-011-3B | 180 | 150 | 368 | 353 | 343 | 210 | 165 | 136 | 7 | |
| EM630-015-3B | ||||||||||
| EM630-018-3B | ||||||||||
| EM630-022-3/3B | 250 | 200 | 484 | 470 | 440 | 222 | 150 | -- | 9 | (c) |
| EM630-030-3/3B | ||||||||||
| EM630-037-3/3B | ||||||||||
| EM630-045-3/3B | 315 | 200 | 560 | 546 | 513 | 250 | 180 | -- | 9 | |
| EM630-055-3/3B | 350 | 250 | 662 | 638 | 603 | 262 | 188 | -- | 12 | |
| EM630-075-3/3B | ||||||||||
| EM630-090-3 | 386 | 300 | 753 | 724 | 700 | 292 | 231 | 300 | 13 | (d) |
| EM630-110-3 | 416 | 300 | 855 | 825 | 793 | 307 | 246 | 315 | 13 | |
| EM630-132-3 | ||||||||||
| EM630-160-3 | 497 | 397 | 1107 | 1076 | 1036 | 340 | 285 | 348 | 13 | |
| EM630-185-3 | ||||||||||
| EM630-200-3 | ||||||||||
| EM630-220-3 | 656 | 450 | 1348 | 1314 | 1261 | 388 | 232 | 395 | 13 | |
| EM630-250-3 | ||||||||||
| EM630-280-3 | ||||||||||
| EM630-315-3 | 801 | 680 | 1417 | 1383 | 1330 | 388 | 190 | 395 | 13 | |
| EM630-355-3 | ||||||||||
| EM630-400-3 |
){kind=link}