High-Performance Vector Control Inverter 3 Phase 380V to 690V 0.75kw to 560kw VFD with Best Price

Product Description

EM600\660 series 
High-Performance Vector Control Inverter

Three-phase 380~415V 0.75~560kW
Three-phase 660~690V 18.5~220kW
 

Product Description

The EM600 series inverter is a high-performance vector control inverter launched by SINEE. It supports three-phase AC asynchronous motors and permanent magnet synchronous motors; drive control technologies, such as the improved vector VF control technology (VVF), speed sensorless vector control technology (SVC) and speed sensor vector control technology (FVC); speed output and torque output; expansions such as I/O expansion cards, communication bus expansion cards and PG cards.

The EM600 series high-performance vector inverter 
has the following features:
1,High torque control accuracy
2,Wide speed range and high control accuracy
3,Low-frequency carrier: VVF/1Hz/150%,
SVC/0.25Hz/150%FVC/0Hz/150%
4,Support I/O expansion
5,Support communication bus expansion: 485 bus, Profibus-DP network, CANopen network;
6,Support various encoders: ABZ incremental, UVW incremental, UVW wire saver and rotary transformer.
7,Built-in DC reactor above 11kW to increase the power factor and enhance the product reliability;

Product Parameters

Item		Specification
Power supply	Rated voltage of power supply (400V)	380V-20%~415V+20%
	Rated output current (690V)	660V-15%~690V+10%
	Rated voltage and frequency	50-60Hz ± 5%; voltage unbalance rate: <3%
Output	Maximum output voltage	The maximum output voltage is the same as the input power voltage
	Rated output current	Continuous output of 100% rated current
	Maximum overload current	150% rated current: 60s; 180% rated current: 10s; 200% rated current: 2s
Basic control	Driving mode	V/F control (VVF); Speed sensorless vector control (SVC); Speed sensor vector control (FVC)
	Input mode	Frequency (speed) input, torque input
	Start and stop control mode	Keyboard, control terminal (two-line control and three-line control), communication
	Frequency control range	0.00~600.00Hz
	Input frequency resolution	Digital input: 0.01Hz Analog input: 0.1% of maximum frequency
	Speed control range	1:50(VVF),1:200(SVC),1:1000(FVC)
	Speed control accuracy	Rated synchronous speed ± 0.2%
	Acceleration and deceleration time	0.01 s to 600.00 s / 0.1 s to 6,000.0 s / 1 s to 60,000 s
	Voltage/frequency characteristics	Rated output voltage: 20% to 100%, adjustable; fundamental frequency: 1Hz to 600Hz, adjustable
	Torque boost	Fixed torque boost curve, any V/F curve optional
	Starting torque	150%/1Hz(VVF),150%/0.25Hz(SVC),150%/0Hz(FVC)
	Torque control accuracy	±8% rated torque (SVC), ±5% rated torque (FVC)
	Self-adjustment of output voltage	When the input voltage changes, the output voltage will basically remain unchanged
	Automatic current limit	Output current is automatically limited to avoid frequent overcurrent trips
	DC braking	Braking frequency: 0.01 to maximum frequency  Braking time: 0~30S Braking current: 0% to 100% of rated current
	Signal input source	Communication, multi-speed, analog, high-speed pulse, etc
Input and output	Reference power supply	10V/20mA
	Terminal control power	24V/200mA
	Digital input terminal	7 (standard X1 to X7) + 4 (extension card X8 to X11) digital multi-function inputs: X7 can be used as a high-speed pulse input terminal (F02.06 = 35/38/40); The remaining 10 channels (X1 to X6 and X8 to X11) can only be used as ordinary digital input terminals.
	Analog input terminal	3 (standard AI1 to AI3) + 1 (extension card AI4) analog inputs: One (AI1) voltage source: 0 to 10V input; Two (AI2/AI3): 0 to 10V input voltage or 0 to 20mA input current optional; One (AI4) voltage source: -10V to 10V input
	Digital output terminal	2 (standard Y1/Y2) + 1 (extension card Y3) open-collector multi-function outputs and 2 (R1: EA/EB/EC and R2:RA/RB/RC) relay multi-function outputs. Maximum output current of the collector: 50mA; relay contact capacity: 250VAC/3A or 30VDC/1A, with EA-EC and RA-RC normally open and EB-EC and RB-RC normally closed
	Analog output terminal	Two (M1/M2) multi-function analog output terminals, with output of 0 to 10V or 0 to 20mA
Operation panel	LED display	The LED digital tube displays relevant information about the inverter
	Parameter copying	Parameter settings of the inverter can be uploaded and downloaded for fast parameter copying
Protection	Protective Function	Short circuit, overcurrent, overvoltage, undervoltage, phase loss, overload, overheat, overspeed, load loss, external fault, etc.
Use conditions	Location	Indoor, at an altitude of less than 1 km, free of dust, corrosive gases and direct sunlight
	Applicable environment	-10ºC to +40ºC, 20% to 90%RH (non-condensing)
	Vibration	Less than 0.5g
	Storage environment	-25ºC~+65ºC
	Installation method	Wall-mounted, floor-standing electrical control cabinet, through-wall
Protection level	Protection level	Standard IP20/IP21 (450kW and above)
Cooling method	Cooling method	Forced air cooling

Installation Instructions

Company Profile